| Line 3: | Line 3: | ||
Need help encoding your music? We're here to help! | Need help encoding your music? We're here to help! | ||
| − | + | * As our [[Submission Standards and Instructions]] mention, audio must be '''16-bit, 44.1kHz stereo''' with a bitrate of either: | |
| − | + | **'''192kbps''' (constant or average bitrate) *OR* | |
| − | + | **'''VBR1''' (variable bitrate, quality = 1). | |
| − | + | * Both of these settings produce good results; VBR1 results in higher quality, but 192kbps may be easier depending on your software or personal workflow. | |
| − | + | * While some Digital Audio Workstations (DAWs) allow exporting a song directly to MP3, we recommend exporting to WAV and then encoding with a separate application. This allows the most flexibility and also ensures you've got a backup WAV copy of your song if you need to re-encode! | |
| + | * '''We strongly recommend the [http://lame.sourceforge.net/ LAME encoder]'''; a good Windows frontend is [http://winlame.sourceforge.net winLAME]. Additional frontends are listed at [http://lame.sourceforge.net/links.php http://lame.sourceforge.net/links.php] | ||
| + | * If your DAW supports directly exporting to MP3 and you prefer doing it that way, that's fine, just make sure it supports either 192Kbps or VBR1!! | ||
| + | * A walkthrough of encoding a WAV with winLAME is available below for reference. | ||
| − | <div | + | == winLAME Encoding Walkthrough == |
| − | :A.) INPUT FILES: Load your WAV file into winLAME | + | |
| + | <div style="float:left;margin:8px;width:48%;"> | ||
| + | ''':A.) INPUT FILES:''' Load your WAV file into winLAME | ||
[[image:VBR_Encoding_-_Step_1.png|400px|Step 1: Load your WAV file into winLAME]] | [[image:VBR_Encoding_-_Step_1.png|400px|Step 1: Load your WAV file into winLAME]] | ||
</div> | </div> | ||
| − | <div | + | <div style="float:left;margin:8px;width:48%;"> |
| − | :B.) OUTPUT SETTINGS: Choose the output location where the finished MP3 should be placed | + | ''':B.) OUTPUT SETTINGS:''' Choose the output location where the finished MP3 should be placed |
[[image:VBR_Encoding_-_Step_2.png|400px|Step 2: Choose the output location where the finished MP3 should be placed]] | [[image:VBR_Encoding_-_Step_2.png|400px|Step 2: Choose the output location where the finished MP3 should be placed]] | ||
</div> | </div> | ||
| − | <div | + | <div style="float:left;margin:8px;width:48%;"> |
| − | :C.) PRESETS: At the Presets list, select Custom Settings | + | ''':C.) PRESETS:''' At the Presets list, select Custom Settings |
[[image:VBR_Encoding_-_Step_3.png|400px|Step 3: At the Preset list, select Custom Settings]] | [[image:VBR_Encoding_-_Step_3.png|400px|Step 3: At the Preset list, select Custom Settings]] | ||
</div> | </div> | ||
| − | <div | + | <div style="float:left;margin:8px;width:48%;"> |
| − | :D.) LAME SETTINGS: Select High for the encoding quality, and a quality level of 1 | + | ''':D.) LAME SETTINGS:''' Select High for the encoding quality, and a quality level of 1 |
[[image:VBR_Encoding_-_Step_4.png|400px|Step 4: Select High for the encoding quality, and a quality level of 1]] | [[image:VBR_Encoding_-_Step_4.png|400px|Step 4: Select High for the encoding quality, and a quality level of 1]] | ||
</div> | </div> | ||
| − | <div | + | <div style="float:left;margin:8px;width:48%;"> |
| − | :E.) ENCODING: Underneath "Encoding Control," click the arrow/play button, and you're all set! | + | ''':E.) ENCODING:''' Underneath "Encoding Control," click the arrow/play button, and you're all set! |
[[image:VBR_Encoding_-_Step_5.png|400px|Step 5: Underneath "Encoding Control," click the arrow play button, and you're all set!]] | [[image:VBR_Encoding_-_Step_5.png|400px|Step 5: Underneath "Encoding Control," click the arrow play button, and you're all set!]] | ||
</div> | </div> | ||
| + | <div style="clear:both;"> </div> | ||
Revision as of 20:23, 17 February 2012
Guidance for Encoding MP3s
Need help encoding your music? We're here to help!
- As our Submission Standards and Instructions mention, audio must be 16-bit, 44.1kHz stereo with a bitrate of either:
- 192kbps (constant or average bitrate) *OR*
- VBR1 (variable bitrate, quality = 1).
- Both of these settings produce good results; VBR1 results in higher quality, but 192kbps may be easier depending on your software or personal workflow.
- While some Digital Audio Workstations (DAWs) allow exporting a song directly to MP3, we recommend exporting to WAV and then encoding with a separate application. This allows the most flexibility and also ensures you've got a backup WAV copy of your song if you need to re-encode!
- We strongly recommend the LAME encoder; a good Windows frontend is winLAME. Additional frontends are listed at http://lame.sourceforge.net/links.php
- If your DAW supports directly exporting to MP3 and you prefer doing it that way, that's fine, just make sure it supports either 192Kbps or VBR1!!
- A walkthrough of encoding a WAV with winLAME is available below for reference.
winLAME Encoding Walkthrough
:A.) INPUT FILES: Load your WAV file into winLAME
:B.) OUTPUT SETTINGS: Choose the output location where the finished MP3 should be placed
:C.) PRESETS: At the Presets list, select Custom Settings
:D.) LAME SETTINGS: Select High for the encoding quality, and a quality level of 1
:E.) ENCODING: Underneath "Encoding Control," click the arrow/play button, and you're all set!
